Chủ Nhật, 24 tháng 2, 2013

Calibration Services Tempsens LGP Vietnam

Công ty TNHH TM-DV Lâm Gia Phú
Đ/c: 77 Đường số 5, Phường 3, Quận Gò Vấp, TP.HCM, Việt Nam
Tel: 083 588 0828 - Mr Vũ
Fax: 083 588 0829
Email: hoaivu@lamgiaphu.com  ( Mr Vũ : 0909 530 828 )
 
Bộ điều khiển nhiệt độ AST P-120 Tempsens - www.lamgiaphu.com
Thiết bị đo nhiệt độ Tempsens India - LGP Co.,Ltd
Đầu dò nhiệt độ hãng Tempsens - Đại lý phận phối Tempsens
Thermocouples Tempsens - www.lamgiaphu.com
Can nhiệt Tempsens India - LGP Vietnam distributor
Tempsens Instruments (I) Pvt. Ltd - LGP Vietnam distributor
 
Calibration Services Tempsens LGP Vietnam

Tempsens Calibration Centre is an independent unit of Tempsens instruments (I) Pvt. Ltd.
It is the only private sector company in the country with accredited Fixed Point Temperature calibration Laboratory . The lab has highly stable calibration furnaces, measuring instruments and accurate master sensors traceable to National and international Standards. The calibration center functions as per ISO17025/NABL standards. Calibration of contact type sensors can be made in temperature range of -196°C to 1600°C.And Calibration of non contact type sensors can be made in temperature range 0°C to 1700°C. Further the laboratory offers both in house and on site temperature calibration.
Unique Advantages
One of the best Labs in India equipped with various type of calibration furnaces and measuring instruments.
  • Fixed point cells calibration.
  • One of the best B.M.C.
  • NABL Accreditation
  • Provide on-site calibration
  • Prompt and Fast Services
  • Covers wide range -196°C to 1600°C with NABL Certificate.
  • Unique Feature Covers wide range -196°C to 1700°C with NABL Certificate.
In House Calibration Facility:
In house calibration facility for contact and non contact type sensor traceable to National and International standards. Best Measurement Capabilities and temperature range is as shown in table
Quality Measured/Instruments
Temperature Range
Best Measurement Capability
Contact Type RTD, Thermocouples Thermometers
-38°C to 0°C
>0°C to 140°C
>140°C to 250°C
>250°C to 500°C
>500°C to 1000°C
>1000°C to 1200°C
>1200°C to 1600°C
0.06°C
0.05°C
0.10°C
0.18°C
1.24°C
2.20°C
3.70°C
Non Contact Type Pyrometer
50 °C to 250°C
>250°C to 400°C
>400°C to 500°C
>500°C to 800°C
>800°C to 1200°C
>1200°C to 1600°C
1.5°C
2.4°C
3.4°C
3.6°C
4.1°C
5.9°C


Onsite Calibration
Our state-of-the-art labs provide cost effective calibration services at your location. You no longer need to disassemble your delicate equipment and send components across the country. Our experienced and trained Engineers go to the site to calibrate the instrumentation, usually without the time and expense of removing and reinstalling them. This saves time and money of customer.
Our engineers help customers to provide fast and accurate on-site calibration for contact temperature sensors in temperature range
-196°C to 1600°C and for non contact temperature sensors in temperature range 0°C to 1700°C with lowest down time. We can provide on-site service in other areas by special arrangement. On site Best Measuring Capability and Temperature Ranges as shown in following table
Quality Measured/Instruments
Temperature Range
Best Measurement Capability
Contact Type RTD, Thermocouples Thermometers
-25°C to 0°C
>0°C to 140°C
>140°C to 250°C
>250°C to 500°C
>500°C to 1000°C
>1000°C to 1200°C
0.062°C
0.05°C
0.10°C
0.18°C
1.25°C
2.2 °C
Non Contact Type Pyrometer
50 °C to 250°C
>250°C to 400°C
>400°C to 500°C
>500°C to 800°C
>800°C to 1200°C
1.6°C
2.4°C
3.6°C
3.6°C
4.1°C

Fixed Point Calibration Facility :
We are first private company to provide fixed point temperature calibration for Triple point of water (Tpw), Gallium (Ga), Tin (Sn), Zinc (Zn) & Aluminum (Al) Cells.
Fixed points are most accurate devices available for defining a temperature scale. Fixed point cells are designed to realize the liquid-solid equilibrium temperatures of certain high purity metal elements, for calibration of thermometers at ITS-90 fixed points. The best measuring capability and Temperature range for fixed point calibration is shown in table
Quality Measured/Instruments
Temperature Range
Best Measurement Capability
Calibration of SPRT/PRTS/ THERMOCOUPLES at
Triple Point of Water (0.01°C)
Melting Point of Gallium (29.7646°C)
Freezing Point of Tin (231.928°C)
Freezing Point of Zinc (419.527°C)
Freezing Point of Aluminum (660.323 °C)
0.015°C
0.029°C
0.039°C
0.034°C
0.040°C

Thermography Survey

Thermography enables to monitor the thermal efficiency of critical process systems that rely on heat transfer of retention. We provide thermography services for predictive and preventive analysis in all types of industries. Infra-red Thermal imaging (non-contact measurement of temperature) is the only temperature tool that can not only predict a failure effectively but also understand the root imperfections properly. Our team of thermography experts provide on site analysis with the customer. The report of such analysis are provided to the customer for taking up the corrective actions based on the severity of the problem.

Consultancy Services

Our experience of three decades in instrumentation and automation provides us a unique experience in this field. Our experienced team of engineers provides the solution for your automation needs.
Tempsens Calibration Centre provides Consultancy Services in
  • Selection of the best method of obtaining traceability for temperature measuring instrumentation.
  • Identifying Master equipment & setting up a Calibration Laboratory as per ISO/IEC 17025:2005
  • Training in BMC, conducting PT, Internal Audit, Management Review, Document preparation etc.
  • Training the staff to run the Laboratory as per ISO/IEC 17025:2005
  • Assisting in getting NABL Accreditation

 
Công ty TNHH TM-DV Lâm Gia Phú
Đ/c: 77 Đường số 5, Phường 3, Quận Gò Vấp, TP.HCM, Việt Nam
Tel: 083 588 0828 - Mr Vũ
Fax: 083 588 0829
Email: hoaivu@lamgiaphu.com  ( Mr Vũ : 0909 530 828 )

Furnace Monitoring Camera Tempsens LGP Vietnam

Công ty TNHH TM-DV Lâm Gia Phú
Đ/c: 77 Đường số 5, Phường 3, Quận Gò Vấp, TP.HCM, Việt Nam
Tel: 083 588 0828 - Mr Vũ
Fax: 083 588 0829
Email: hoaivu@lamgiaphu.com  ( Mr Vũ : 0909 530 828 )
 
Bộ điều khiển nhiệt độ AST P-120 Tempsens - www.lamgiaphu.com
Thiết bị đo nhiệt độ Tempsens India - LGP Co.,Ltd
Đầu dò nhiệt độ hãng Tempsens - Đại lý phận phối Tempsens
Thermocouples Tempsens - www.lamgiaphu.com
Can nhiệt Tempsens India - LGP Vietnam distributor
Tempsens Instruments (I) Pvt. Ltd - LGP Vietnam distributor
Products

Exhibition


















Furnace Monitoring System
Technical Details
Most economic high performance Furnace Monitoring Camera Technically superior, cost effective high performance Kiln Shell Scanners
System for High Temperature areas in Steel, Glass, Cement and Power Industries.
  • Furnace probe
  • Radial direction of view
  • Furnace lens with angle of view H: 20 and lens pan mechanism
  • pan range: plus 45° to minus 15°
  • Electronic zoom 1:4 in each position.
  • Axial direction of view
  • Furnace lens with angle of view from H: 76° to 94° (optional)
  • Water-cooled camera
  • protective housing
  • Operates to 2400°C

Công ty TNHH TM-DV Lâm Gia Phú
Đ/c: 77 Đường số 5, Phường 3, Quận Gò Vấp, TP.HCM, Việt Nam
Tel: 083 588 0828 - Mr Vũ
Fax: 083 588 0829
Email: hoaivu@lamgiaphu.com  ( Mr Vũ : 0909 530 828 )

Kiln Shell Scanner Tempsens LGP Vietnam

Công ty TNHH TM-DV Lâm Gia Phú
Đ/c: 77 Đường số 5, Phường 3, Quận Gò Vấp, TP.HCM, Việt Nam
Tel: 083 588 0828 - Mr Vũ
Fax: 083 588 0829
Email: hoaivu@lamgiaphu.com  ( Mr Vũ : 0909 530 828 )
 
Bộ điều khiển nhiệt độ AST P-120 Tempsens - www.lamgiaphu.com
Thiết bị đo nhiệt độ Tempsens India - LGP Co.,Ltd
Đầu dò nhiệt độ hãng Tempsens - Đại lý phận phối Tempsens
Thermocouples Tempsens - www.lamgiaphu.com
Can nhiệt Tempsens India - LGP Vietnam distributor
Tempsens Instruments (I) Pvt. Ltd - LGP Vietnam distributor
Kiln Shell Scanner Tempsens

For Cement Industry

The KILNSCAN infrared line scanner is used for rotary kiln shell temperature monitoring. This system enables to prevent risks of hot spot formation on the shell, to early detect refractory brick fall, to determine coating thickness and to evaluate the kiln thermal warp amplitude.
Technically superior, cost effective high performance Kiln Shell Scanners

For Glass Industry

The FLOATSCAN 21 line scanner system enables measurement and control of thermal distribution over glass sheets, in real time.



KilnScan 23

KilnScan 17

FloatScan 21












Scanning Rate
20 Hz & 25 Hz
Scanning angle
90º (optional 140º)
Thermal Range
Ambient to 600º C
Thermal Resolution
0.5º C at 100º C
0.5º C at 300º C
Spatial Resolution
0.9 mard at 50% of modulation
2.0 mard at 90% of modulation
Accuracy
± 2º
C For A Kiln Length of 60 M
Spot detection size
2.7 cm
Spot detection size
6 cm

Scanning Rate
20 Hz & 25 Hz
Scanning angle
90º (optional 140º)
Infrared Detector
Pbse,Thermoelectrically Cooled
Thermal Range
75 to 600º C
Thermal Resolution
1.5º C at 100º C
0.1º C at 600º C
Spatial Resolution
2.0 mard at 50% of modulation
5.0 mard at 90% of modulation
Accuracy
± 2º C
Nominal Length For Fibre
Optics: 100m
Max Length For Fibre Optic: 1500 m
For A Kiln Length Of 60 Metres
Spot detection size
60 cm
Spot detection size
150 cm

  • Compact and light scanning head for easy handling
  • Wide viewing angle 90° for closer distance to lehr roof
  • Very precise image of the glass sheet temperature due to :
    - high sensor sensitivity (0.3 °C at 500 °C),
    - high resolution (6 mm dia. detection spot at 2 m distance),
    - 16 bit fibre optic transmission.
  • 4-20 m A output signals + alarm relays
  • IP 65 - CEI 60529 / NEMA 12 enclosure

 
Công ty TNHH TM-DV Lâm Gia Phú
Đ/c: 77 Đường số 5, Phường 3, Quận Gò Vấp, TP.HCM, Việt Nam
Tel: 083 588 0828 - Mr Vũ
Fax: 083 588 0829
Email: hoaivu@lamgiaphu.com  ( Mr Vũ : 0909 530 828 )